Product Name:	LED Push Button Trailing Dimmer Vela
Product Code:	9035

Product Features:

• Soft start
• Overload protection and short circuit protection
• Easy to mount in most Australian plates
• Suitable for dimming dimmable LED globes, incandescent globes, high voltage halogen globes, electronic transformers with low voltage halogen globes
• Long press dimming button to dim
• Short press dimming button to on/off
• Comes with 2 face caps round and square edged to suit most Australian plates
• IP rating: IP20

TYPE: Dimmer
WARRANTY: 3 year replacement warranty
LENGTH: 23.5mm
WIDTH: 23.5mm
DATA SHEET: available upon request

Product Name: LED Push Button Trailing Dimmer Vela
Product Code: 9035
Sales Inquiries: 03 9973 6373
Email Inquiries: service@lightingstyle.com.au

Lighting Style
ABN 97 623 567 868
www.lightingstyle.com.au

This product conforms to AS/NZ electrical standards. Unless marked as DIY, electrical installation must be performed by a licensed electrician. The information in this datasheet has been carefully checked and is believed to be accurate - it is our practice to provide accurate information wherever possible; however, final specifications may vary. Performance data given in this document are provided as a guide for the user in determining suitability and do not constitute a warranty. Actual performance is subject to the Warranty and Limitations of Liability. Lighting Style shall not be responsible for special, indirect, or consequential damages or loss in any way connected with this product. Warranty is subject to the product being properly handled, stored, installed, and maintained.