Product Name:	RGB Remote Control LED Strip Light Kit DIY With Plug 5 Metres
Product Code:	19008

DIY 5m remote-control flexible LED strip light that is ideal for any location around your home or commercial spaces. You can cut the strip or use as is.

TYPE: LED Strip Light
WARRANTY: 3 years (LED strip must be installed on an aluminium heat dissipating surface)
IP RATING: IP20 (indoors)
SWITCH: Yes
LUMENS: 300 lm/m
DIMMABLE: Yes
LENGTH: 5m
WIDTH: 10mm
LED PER METRE: 20
CRI: 80
WATTAGE: 7.2 W/m
VOLTAGE: 12V
DRIVER: Yes
INCLUDES: 5m LED strip, driver, flex and plug, Bluetooth remote control
DIY: Yes
REMOTE CONTROL: Yes
FLEX & PLUG: Yes
CUTTABLE: Every 50mm

Product Name: RGB Remote Control LED Strip Light Kit DIY With Plug 5 Metres
Product Code: 19008
Sales Inquiries: 03 9973 6373
Email Inquiries: service@lightingstyle.com.au

Lighting Style
ABN 97 623 567 868
www.lightingstyle.com.au

This product conforms to AS/NZ electrical standards. Unless marked as DIY, electrical installation must be performed by a licensed electrician. The information in this datasheet has been carefully checked and is believed to be accurate - it is our practice to provide accurate information wherever possible; however, final specifications may vary. Performance data given in this document are provided as a guide for the user in determining suitability and do not constitute a warranty. Actual performance is subject to the Warranty and Limitations of Liability. Lighting Style shall not be responsible for special, indirect, or consequential damages or loss in any way connected with this product. Warranty is subject to the product being properly handled, stored, installed, and maintained.