This commercial strength high quality LED solar motion sensor light will enhance your safety and security simply by mounting on a wall or a fence. There are three lighting modes you can choose from:
Mode 1: dark when no motion is detected, then 100% brightness (1000 lumens) when motion is detected.
Mode 2: dim lighting (20 lumens) when no motion is detected, then 100% brightness (1000 lumens) when motion is detected.
Mode 3: no motion sensor - 20 lumens constant lighting the whole night.
Applications include front doors, building entrances, gates, steps, gardens, backyards, fences, patios, decks, pool areas, paths, driveways, sidewalks, local walking tracks, biking tracks and illumination of building numbers or letterboxes.
The installation is simple and DIY: choose your location, ensuring plenty of natural, daily sunlight hits the solar panel. Drill two holes into the wall, fence or beam. Fix the light using the supplied screws (and expansion lugs if necessary). Choose the lighting mode which is appropriate for you.
Allow your solar light to charge for at least 8 hours by sunlight before first time use. Dull daylight hours will affect charging times, so exercise patience if the weather conditions are poor.

TYPE: Commercial Strength Solar Sensor Light
COLOUR: Black
WARRANTY: 2 years
IP RATING: IP65 (fully weatherproof)
IK RATING: IK06 (medium resistance to impact and vandalism)
MATERIAL: Thermal Conductive Plastic
SENSOR: Yes
LUMENS: Up to 1000 lm
COLOUR TEMP: 4000K (cool white)
GLOBE TYPE: LED (fixed in fitting)
GLOBE INCLUDED: Yes (fixed LED chip)
AMBIENT TEMP: 0°C to 45°C
HEIGHT: 55mm
WIDTH: 79.5mm
LENGTH: 90mm
WATTAGE: 10W
DRIVER: PIR Motion Sensor
SOLAR PANEL: Yes (5.5V, 0.5W)
CHARGING TIME: 8-20 hours
BATTERIES: Li-ion 7.4Wh, 2AH 3.7V
LIGHTING TIME: Over 8 hours per night (on full charge can do 2+ nights on motion sensor)
DISCHARGING TEMP: -20°C to 60°C