This is a high-quality solar wall light with a motion sensor and wide-angle ultra-bright illumination (400 lumens). An absolute must-have on your outdoor walls for safety and security including around paths, entrances, patios, BBQ areas, stairways, shopping strips, courtyards and gardens as well as commercial and retail premises. The light provides dim ambience when motion is not detected - and then goes ultra bright when anyone approaches. No mains power or cabling required. It has a powerful battery so can provide lighting for the entire night.
This solar light comes complete - including solar light, solar panel, rechargeable batteries, all installation accessories etc. You do not need to purchase anything else.
Benefits:
- Totally green, sun powered and energy efficient
- Safe, tough, durable and waterproof
- Long life batteries included – no dangerous chemicals
- Ultra thin with stylish design
- Simple DIY installation
Lighting Modes (selectable):
- 100% brightness when motion sensor activated, reverts to 25% brightness after 10 seconds
- 100% Brightness when motion sensor activated, turns off after 10 seconds
- No motion sensor - constant lighting is provided at 100% brightness for over 6 hours per night
Product Specifications:
- Solar Panel: 6V, 2.5W Polycrystalline Silicon
- Li-ion battery: 2000mAh, 3.7V Lithium Battery
- LED: 36 Pcs Epistar SMD 2835
- Lighting: 400 Lumens LED in Cool White
- Charging Time: 6-8 hours
- Lighting Time: Over 6 hours of constant lighting and over 8 hours in motion sensor
- Waterproof: IP65 (completely rain proof)
- Material: High-Quality ABS + PC
- Size: 180mm x 110mm x 30 mm
- Sensing Method: Infrared
- Warranty: 12 months
- Incudes: light, motion sensor, installation lugs, rechargeable batteries, user manual
How to Install:
- Choose your preferred location, ensuring plenty of natural, daily sunlight hits the solar panel.
- Check the position effectiveness in the dark, and keep the solar panel clear of overhanging branches, heavy shrubbery or other opaque obstacles. Move to a brighter location if sunlight appears blocked.
- Drill two holes into the wall, above the door, on a column, or the fence.
- Fix the light using the supplied screws (and expansion lugs if necessary).
- Allow your solar light to charge for at least 7 hours.
- Press and hold the 'Mode' button for 3 seconds to activate the light before the first time use.
- The wall light will automatically turn on at dusk when activated.
- Note: test your light for effective charging in this space before fixing it into position permanently.
Special Notes:
- Please charge your light under direct, bright sunlight for over 7 hours before first time use.
- Dull daylight hours will affect charging times, so exercise patience if the weather conditions are poor.
